Sales: +971561112405     Support: +971502003017     Parts: +971509232509     UAE, Dubai

Where are engine mount location?

Home » Engine Mount » Where are engine mount location?
Table of Contents

The engine mount location can vary depending on the type of vehicle and its design. Engine mounts are designed based on the vehicle’s design, chassis type, and the engine’s power and volume to prevent various vibrations.

In its various forms, an engine or gearbox mount is a base made of metal, embedded rubber, springs, or hydraulic jacks that connect the engine and gearbox to the vehicle’s chassis and firewall. Its purpose is to neutralize the impacts and vibrations transmitted.

Where are engine mounts location

Typically, one of the most critical engine mounts is installed at the rear of the gearbox frame. This gearbox mount connects the back of the gearbox to the frame and is attached to the frame via a bolted section. It connects to the gearbox casings through the holes in the base using the bolts around the gearbox.

These relatively small parts are used in nearly 99% of vehicles produced worldwide, except for some sports and unique cars. The absence or failure of these parts can lead to excessive vibration, jolts, and loud noises while driving. However, it should be noted that all Kia and Hyundai vehicles have sturdy engine mounts that are less likely to fail if the car is used correctly. Engine mounts usually remain intact if they do not encounter severe impacts or excessive speed bumps and will maintain their performance for a long time.

Since the engine mount reduces the severity of the engine’s impact on the vehicle’s body and prevents body damage, automotive designers place them in a location that does not interfere with the engine’s operation before preparing and manufacturing the cars.

The engine can then continue to operate in a fixed position without transferring severe vibrations to the cabin and causing damage to other parts. This part is made of two components: a base and a bushing. The base is often made of an aluminum and zinc alloy. The bushing is made of compressed rubber and is pressed into the base.

The positioning of engine mounts and their locations vary based on the engine type and design; for example, in vehicles with transversely mounted engines and front drive axles, three engine mounts are typically used—two at the bottom and one at the top. However, in vehicles with longitudinally mounted engines aligned with the cabin and chassis, engine mounts are installed on both sides of the engine.

how to mount the engine on an engine stand

In all vehicles worldwide, including those produced by Kia and Hyundai, the engine mount location depends on the vehicle model, but engine mounts are typically located in these areas:

  • Front of the engine
  • Back of the engine
  • Under the engine

Engine mounts are usually located around the lower parts of the engine. Some vehicles have only two engine mounts, one on each side of the engine.

Due to the design and type of engine and chassis, some vehicles may have three or four engine mounts. In reality, engine mounts are placed between the engine block and the vehicle’s frame or between components such as the gearbox and suspension parts. Common locations for engine mounts include the sides of the engine block, at the back near the gearbox, and sometimes under the engine.

Where are engine mounts

If the engine or gearbox were rigidly attached to the chassis, for example, with bolts or welding, the vibrations from these two parts would damage and twist the chassis and the engine and gearbox themselves.

Therefore, the connection points of the engine and gearbox with the chassis must be flexible, which is where the importance of the engine mount is fully felt. Consequently, the engine mount location is precisely where the vehicle can firmly hold the engine in place.

Most Hyundai and Kia vehicles have three to five engine mounts, with one from the top and two from the bottom connected to the engine casing. Damage to the upper engine mount is often costly and dangerous, causing the engine to tilt or the timing belt or chain to break. Although the lower engine mount bears more of the engine’s weight, its failure is not as dangerous as that of the upper engine mount.

engine mount repair

Given the importance of the vehicle’s engine mount in proper machine operation and preventing potential financial damages, paying attention to the manufacture of this part and investing time and money where it will be most effective. As a result, we at Arsintrading provide the best opportunity for you to purchase engine mounts and other Hyundai and Kia spare parts so that you can buy the desired part anywhere in the world as quickly as possible.

Get price and free consultation

Leave a Reply

Your email address will not be published. Required fields are marked *