Maintaining every component of your Hyundai car is an essential factor for both appearance and functionality.
In this respect, the Hyundai front door panel plays a vital role, not only in providing good looks but also ensuring fluent operations such as locking mechanisms and insulation.
As a Hyundai owner in Dubai or anywhere in the Middle East, it is important to know from where you can rely on getting the right information related to repairs, replacements, and costs regarding the Hyundai front door panels of your vehicle.
This article will go through all that one should know about Hyundai front door panels, with specific insight into models like the Hyundai Elantra, Sonata, and Tucson.
2013 Hyundai Elantra Front Door Panel Removal
Removal of the front door panel of a Hyundai to a 2013 Elantra is an easy process that requires careful steps to avoid damage.
Identify the screws and fasteners that attach the panel to the door frame. These are normally hidden behind the handle cover and armrest.
Take a flathead screwdriver and gently pry off the plastic trims. Be very careful with this step, as any scratch may reduce the appeal of your car in general. Once the screws are out, gently pull the panel from the edges to release the clips.
Remember, these clips can break easily, so handle them with care. This method ensures that the panel is safely detached, allowing access to internal components like the speakers or window regulator.
2013 Hyundai Sonata Front Door Panel Removal
For the 2013 Hyundai Sonata, it would indeed take some patience and a lack of proper tools to detach the front door panel.
Starting with the screw just beneath the door handle, reach behind the cover and carefully remove it by unscrewing with your Phillips screwdriver.
Using your trim tool, start tugging on the panel lightly at this point. Gently pull the panel upwards, thus extracting it from the window seals.
The connectors for power window and lock controls are installed in the Sonata’s front door panel.
These will be unplugged carefully as you completely detach the panel. Screws and clips may be kept in one place, in order to help them out during reassembly.
2015 Hyundai Elantra Front Door Panel Removal
The procedure to remove the 2015 Hyundai Elantra front door panel is direct and simple. First and foremost, disconnect the battery just in case an electrical mishap occurs. Locate and remove the screws near the door handle and speaker grille.
Using a pry tool, gently remove the speaker grille and then start detaching the panel. The edges of the panel are held by plastic clips that can be removed with minimal force. Once the panel is loose, disconnect the wiring harness for the power features.
Whether you are repairing the door lock or upgrading your speakers, this procedure provides access without damage to the panel or its components.
2016 Hyundai Elantra Front Door Panel Removal
Safety first: when dealing with a 2016 Hyundai Elantra, the front door panel removal process will start with some safety precautions.
Ensure that the car is parked in a well-lit area and the battery is disconnected to avoid electrical issues. Take out the screws around the armrest and behind the handle cover with a screwdriver. Gently pry the panel off with a trim removal tool.
The clips that hold the panel in place against the door may be a bit tight, so be sure to use some steady pressure. Detach all cables from the mechanism of the door lock and the handle.
This is a guarantee that the panel will be completely free to work on the inner parts by either repair or replacement.
2016 Hyundai Tucson Front Door Panel Removal
The 2016 Hyundai Tucson front door panel is another model that requires care during removal. Begin by locating the screws behind the armrest and handle. After removing the screws, use a plastic pry tool to detach the trim pieces.
The Tucson model features a unique wiring setup for its power windows and locks, so it’s crucial to disconnect these connections carefully.
This allows access, after removing the panel, to the internal components of the door, such as the window motor and lock mechanisms, for repair or upgrade.
2017 Hyundai Elantra Front Door Panel Removal
In the 2017 Hyundai Elantra, the removal of the front door panel is basically similar to its predecessors but with attention to details. The first step involves the identification of screws located near the armrest and behind the door handle.
Remove these screws and use a pry tool to loosen the clips holding the panel in place. Slowly pull the panel away from the door frame, making sure you don’t damage the wiring harness connected to the power features. This process is necessary for procedures such as replacing the window regulator or adding sound systems.
2017 Hyundai Tucson Front Door Panel Removal
Removing the 2017 Hyundai Tucson front door panel requires precision and patience. Start by unscrewing the bolts behind the handle and at the bottom of the panel. Use a trim removal tool to carefully detach the clips that attach the panel to the door frame.
Once the panel is free, disconnect the electrical connections for the power windows and locks. This procedure allows access to the internal parts of the door, thus enabling repairs or upgrades without causing damage to the panel or its components.
Hyundai Door Replacement Cost in Dubai
Hyundai front door panel replacement costs in Dubai may vary significantly depending on the model and the extent of the damage. For minor issues like scratches or dents, repair costs might be in the range from AED 300 up to AED 800.
However, replacing one panel is usually more costly, starting from AED 1,200 upwards, to as high as AED 3,000 for some newer models like the Hyundai Tucson or Elantra. However, the price will vary based on factors such as labor costs, the cost of replacement parts, and whether you would go for genuine Hyundai spare parts or an aftermarket part.
Enlisting the services of a reputable service provider ensures a well-done replacement job that may retain the resale value of your car.
2010 Hyundai Sonata Door Handle Replacement
The Hyundai Sonata 2010 also often needs door handle replacements after wear and tear. To replace the handle, first remove the interior door panel according to the previous sections. Find the screws and bolts that hold the handle in place on the door mechanism.
After removing these, carefully take off the old handle and attach a new one in its place. Make sure all connections, including the lock and latch, are securely fastened before putting the panel back together. This will be done properly with genuine Hyundai parts to ensure that the work is durable and perfectly fitted, maintaining your Sonata at the best condition.
At Arsintrading, we pride in being your trusted online store for high-quality Hyundai body parts. Our extensive collection boasts products from top brands to ensure durability and compatibility with your vehicle. Whether you reside in Dubai, elsewhere in the UAE, or anywhere in the Middle East, we have got you covered. From front door panels to other essential Hyundai components, our range guarantees satisfaction and value. Ready to enhance your vehicle’s performance and appearance? Contact us now to Buy Hyundai body parts in UAE and experience premium quality and seamless service today.
Conclusion
The Hyundai front door panel is more than just a functional component; it has much to do with the aesthetics and convenience of your vehicle.
Whether you own a Hyundai Elantra, Sonata, or Tucson, the understanding of removal and replacement processes is vital for maintaining your car.
With reliable service providers in Dubai and a wide range of Hyundai spare parts available, addressing any issues with your door panels has never been easier. Following these guidelines will ensure your Hyundai stays in the best shape, offering style and functionality for many years.
